.png "Molvek Nibo"){kind=logo}
Automation Engineer Job in Aachen | Black Semiconductor
Employer: Black Semiconductor GmbH
Sector: Semiconductor technology and manufacturing
Location: Aachen, North Rhine-Westphalia, Germany; hybrid location type
Open roles: 1
Employment information: Full time; hybrid location type (Aachen)
Black Semiconductor GmbH has a full-time Automation Engineer / Automation Technician position in Aachen within Fab Management, Fab Automation & Integration. The work centres on the Facilities Monitoring and Control System, the operational system used to monitor utilities and technical plant supporting production. The published location type is hybrid, while the position itself is based in Aachen.
This is a practical automation assignment for an engineer or technician who can take ownership after an externally supplied system has been handed over. It suits someone comfortable with live industrial operations: understanding alarms, tracing faults across controls and field devices, and improving a system as production develops from a pilot line towards serial manufacturing. The vacancy calls for sound judgement as well as hands-on diagnostic discipline.
Opportunity Details
Automation responsibility for production-support systems
Monitoring utilities, controls, and technical plant in Aachen
The central technical scope is the Facilities Monitoring and Control System, abbreviated in the vacancy as FMCS. Black Semiconductor describes it as the system that helps secure production operations by monitoring a wide range of utilities and technical installations. These include cleanroom air, chilled-water systems, process cooling, exhaust air, and energy monitoring. The assignment therefore sits close to the infrastructure on which manufacturing depends rather than being limited to an isolated software build.
An external integrator is to supply and commission the system. Following handover, the successful applicant is expected to understand the FMCS in enough depth to keep it dependable, investigate and resolve disruptions, and direct external service providers on technical matters. The role also covers extensions needed as operations progress from a pilot line to serial production, making maintainability and accurate technical documentation important parts of the work.
Within Fab Management and Fab Automation & Integration, the engineer or technician will combine system operation with investigation at equipment level. The published responsibilities connect SCADA and PLC maintenance with checks of instrumentation, signals, alarms, and communications. That combination makes this post particularly relevant to candidates whose industrial automation experience includes keeping operating systems clear, traceable, and responsive when technical issues arise.
About the Employer: Black Semiconductor GmbH
Integrated graphene photonics and chip connectivity
Technology described on Black Semiconductor’s official pages
Black Semiconductor GmbH describes its technology as Integrated Graphene Photonics, bringing high-speed graphene photonics directly onto electronic chips. Its stated aim is to inspire the world to rethink computing. The company explains that the approach integrates photonics and electronics on the same wafer, allowing chips to compute with electricity and communicate with photons.
On its technology page, the company frames chip communication as a constraint on computing systems and presents graphene as a way to integrate photonics and electronics at chip level. It states that its technology is intended to support higher-bandwidth communication while addressing heat, energy use, latency, and distance limitations associated with standard electrical connections. The same page says the processing is compatible with CMOS manufacturing.
The employer’s official material identifies FabONE as its dedicated fab for graphene-based optical chip technology. It describes the facility as supporting a scalable pilot line for 300 mm wafer technology. This manufacturing setting gives the FMCS brief a clear operational context: the role monitors utilities and technical systems that underpin the conditions needed for production activity.
FabONE and the manufacturing context
A pilot-fab setting relevant to facilities automation
Black Semiconductor also states that its people are the foundation of its success and describes a human-centred approach to processes. Its careers text refers to flexibility, collaboration, diversity, openness, trust, and mutual respect. Those cultural statements are published alongside the role, while the technical selection criteria remain focused on industrial automation experience, structured working, quality awareness, and language capability.
For applicants, the most relevant employer context is the link between a chip-connectivity technology programme and a developing production environment. The vacancy does not ask the automation specialist to design the FMCS from the beginning. Instead, it sets out ongoing responsibility for its operation, optimisation, expansion, and technical coordination after commissioning, alongside work with external providers and audit-related activities.
Open Positions
1. Automation Engineer / Automation Technician (Ingenieur Automatisierungstechnik / Automatisierungstechniker (m/w/d))
Official title: Ingenieur Automatisierungstechnik / Automatisierungstechniker (m/w/d)
Location: Aachen, Germany; hybrid location type Employment information: Full time; hybrid location type (Aachen)
The Automation Engineer / Automation Technician takes technical responsibility for the FMCS after its delivery and commissioning by an external integrator. The role is concerned with keeping production-support infrastructure operational, observing system behaviour, and strengthening the system over time. It is not presented as a greenfield programming post; the vacancy emphasises operational understanding, fault analysis, corrective action, and well-controlled growth of the installed system.
Daily work can range from diagnosis within SCADA and PLC systems to verification in the field. The post requires an applicant who can interpret alarms and communication issues in operating utility and production systems, perform targeted signal checks, and translate findings into clear documentation or system changes. External suppliers, service providers, and auditors are part of the technical interface described by the employer.
Responsibilities
- Operate, monitor, and continuously optimise the FMCS to support uninterrupted factory operation.
- Maintain, diagnose, and adjust SCADA and PLC systems, including Siemens WinCC OA or Yokogawa DCS Centum and Siemens S7 controls.
- Investigate and remedy faults, alarms, and communication problems affecting utility and production equipment during operation.
- Carry out loop checks, signal tests, and fault-finding on field devices, instruments, and automation components.
- Develop the system by integrating additional data points, visualisations, reports, and alarm concepts.
- Keep the technical documentation current as the monitoring and control environment changes.
- Serve as the technical contact for external service providers, suppliers, and auditors.
- Support qualification, acceptance, and change-control activities connected with the system.
Qualifications
- Completed training as an automation electronics technician followed by state-certified technician training, or a completed degree in electrical engineering, automation engineering, or a comparable discipline.
- Several years of practical experience with industrial SCADA and PLC systems in a manufacturing or industrial setting, ideally in operations, maintenance, or commissioning.
- Strong knowledge of Siemens S7 controls, including TIA Portal or STEP 7, and experience diagnosing faults on operating equipment.
- Experience with SCADA systems; Siemens WinCC OA or Yokogawa DCS Centum are named as ideal, while comparable platforms are also welcome.
- Practical experience with field instrumentation, loop checks, signal diagnostics, and reading P&ID diagrams, circuit diagrams, and I/O lists.
- A structured, self-directed working approach with strong quality awareness.
- Very good English language skills.
- Preferred: German language skills.
Skills and Competencies
- Technical diagnosis across live automation systems and their communication paths.
- Siemens S7 control knowledge with TIA Portal or STEP 7.
- SCADA-system familiarity, including the ability to maintain and adapt system configurations.
- Methodical signal testing and troubleshooting at field-device and instrumentation level.
- Confident interpretation of P&ID diagrams, circuit diagrams, and I/O lists.
- Clear technical coordination with service providers, suppliers, and auditors.
Benefits and Employment Information
- The employer describes flexible working arrangements intended to support balance between work and private life.
- Continuous learning alongside professional and personal development is described in the vacancy.
- The published benefits package includes insurance benefits, an occupational pension plan, and virtual stock options.
- The employer describes an inclusive and supportive environment focused on collaboration, innovation, and personal growth.
Application Guidance
Show evidence of dependable automation practice
Focus application materials on FMCS-relevant operations and diagnostics
Automation candidates are easiest to assess when they show the systems they kept running, not only the ones they designed. Use specific, truthful examples that show how you monitored SCADA or PLC-controlled equipment, approached an alarm or communication fault, and confirmed the outcome of a repair or adjustment. Where experience includes utilities, process support, cleanroom-adjacent systems, manufacturing, maintenance, or commissioning, identify the technical scope without inflating responsibility.
The vacancy makes documentation, field checks, and external technical coordination meaningful selection themes. It can help to organise evidence around the tools and tasks stated by the employer: Siemens S7, TIA Portal or STEP 7, SCADA platforms, loop checks, instrumentation, signal diagnostics, P&ID diagrams, circuit diagrams, and I/O lists. Describe only systems and actions you can discuss accurately. Very good English is listed as a requirement, while German is identified as an advantage.
- List the industrial environments in which you have operated, maintained, or commissioned SCADA and PLC systems.
- Identify Siemens S7, TIA Portal, STEP 7, or comparable control experience accurately.
- Give a concise example of diagnosing an alarm, signal, or communications issue on operating equipment.
- Note practical work with loop checks, field instrumentation, and relevant technical drawings where applicable.
- Prepare a clear account of how you keep technical changes and troubleshooting findings documented.
- Present English capability clearly and mention German only at the level you can substantiate.
How to Apply
Submit Your Application Through the Verified Route
Use the employer’s official application form
Black Semiconductor processes applications for this position through its official application form, reached from the button below. The form provides fields for contact details, location, salary expectation, notice period, a resume, a cover letter, and a work sample. Prepare the materials that accurately reflect your automation experience and the supporting evidence requested by the form.
Because the vacancy requires very good English, present written material in clear English unless the official form gives different instructions. Keep the resume focused on industrial SCADA and PLC work, diagnostics, instrumentation, and technical documentation. A short cover letter can explain the connection between your experience and the FMCS responsibilities described for the Aachen position.
Post a Comment